JVC HR-XVC24S On-Screen Display VCR deck, To recall an indication, On the tape, Press on Screen

EN 11

On-Screen Display (VCR deck)

If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” ( pg. 59), various operational indicators appear on the TV screen.

For On-screen display for DVD deck, refer to “Using the on-screen bar” ( pg. 47).

A
B	G
C
	H
D	I
E	J
F	K
	L

AChannel Position Number/Auxiliary Input

Indicator (F-1)

BDay/Clock Display

CStereo Program Indicator  pg. 33 D SAP Indicator  pg. 33

E Tape Position Indicator

The tape position indicator appears on the TV screen when you press REW (3) or FF (5) from the Stop mode or perform an Index Search. ( pg. 28) The position of “q” in relation to “B” (beginning) or “E” (end)

shows you where you are	Beginning	End
on the tape.

NOTE:

Depending on the type of tape being used, the tape position indicator may not appear correctly.

FAudio Mode Display  pg. 30 G Operation Mode Indicators H Tape Speed (SP/EP)

I “Cassette Loaded” Mark J Index number  pg. 28

K Tape Remaining Time Indicator  pg. 33 L Counter Display

To recall an indication

APress ON SCREEN.

●All indications corresponding to the current status are displayed for 5 seconds. After that, the counter information and RECORD/PAUSE if in the Record Pause mode, remain on the screen.

BPress ON SCREEN again to clear the display.

● The RECORD/PAUSE indication remains on the screen.