54 EN | EDITING (VCR DECK) (cont.) |
Dubbing
(from DVD to VCR)
●Turn on the TV and select the VCR channel (or AV mode).
●Slide the TV/VCR/DVD switch on the Remote to the right.
Slide to the right.
DVD
VCR
SP/EP |
|
3PLAY |
|
1REW | FF ¡ |
¶REC | 8PAUSE |
4SKIP | 7STOP |
SKIP ¢ |
|
You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish.
However, it is not possible to dub the
In such case, “Err” appears on the front display panel.
A Load a cassette and place a disc.
For the VCR deck
Insert a cassette with the record safety tab intact.
For the DVD deck
For details, refer to “Placing a Disc” ( pg. 8).
B Prepare the VCR deck for dubbing.
APress VCR.
BPress SP/EP to select recording speed.
CSearch for the point where you want to start dubbing by pressing 4 PLAY, FF 5 or 3 REW then press 8 STOP.
C Prepare the DVD deck for dubbing.
APress DVD.
BSearch for the point where you want to start dubbing by pressing 4 PLAY, FF 5, 3 REW, SKIP 6 or
2SKIP.
CPress 9 PAUSE to pause playback a little before the
start point.
●Turn off the
D Start dubbing.
Press and hold 7 REC, then press 4 PLAY on the Remote (on DVD deck mode).
●“dub” lights on the front display panel.
E End dubbing.
Press 8 STOP.
●Be sure to press 8 STOP while the VCR indicator lights up on the unit.
NOTES:
●You can dub from DVD to VCR regardless of the scan mode setting. ( pg. 15) However, the progressive signals will be converted to the interlace signals when dubbing.
●Set “ON SCREEN GUIDE” to “OFF” ( pg. 64) if you do not want to record the
●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing is not recorded.
●Set “PICTURE CONTROL” to “EDIT.” ( pg. 59)
