Digital Audio Dubbing, Place a disc and load a MD | JVC HR-XVC24S

EDITING (DVD DECK)

EN 55

Digital Audio

Dubbing

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch on the Remote to the right.

Recorder

Digital audio device (MD deck etc.)

Coaxial cable (not supplied)

Player

Rear of unit

DIGITAL AUDIO OUT

You can dub selected audio from the DVD or Audio CD disc to a MD etc.

However, it is not possible to dub the copy-protected disc.

Example: Dubbing to a MD

A Make connections.

Connect the coaxial cable between the unit and the digital audio device.

B Place a disc and load a MD.

For the DVD deck

For details, refer to “Placing a Disc” ( pg. 8).

For the digital audio device

Insert a MD.

C Prepare the DVD deck for dubbing.

APress DVD and select the audio to be dubbed.

BSearch for the point where you want to start dubbing by pressing 4 PLAY, FF 5 or 3 REW then press

8STOP.

CPress 3 REW a little, then press 4 PLAY to start playback.

DPress 9 PAUSE to pause playback a little before the start point.

D Prepare the audio device for dubbing.

Select the input mode.

E Start dubbing.

APress 4 PLAY to start playback on the DVD deck. B Start recording on the audio device.

F End dubbing.

Stop recording on the audio device. Then press 8 STOP to stop playback on the DVD deck.

NOTES:

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO OUTPUT” to “PCM ONLY.” ( pg. 62)

Image 55

JVC HR-XVC24S manual Digital Audio Dubbing, Place a disc and load a MD, Prepare the audio device for dubbing, Stop

Contents

For Customer Use HR-XVC24S Declaration of Conformity Dear Customer Grounding or Polarization Power SourcesPower Cord Protection Power Lines Before YOU Install Your NEW Unit On placing the unit Do not place the unitDo not block the unit’s ventilation openings or holes To mobile phone users About Discs DVD deck only Scan Mode Set DVD deck onlyRemote Control Functions Mode Set VCR deck Mode Set DVD deck Child Lock Region Number About DiscsPlayable Discs Unplayable Discs Placing a Disc File Structure of DiscsCare and Handling of Discs J K L M N O P Front View Rear View 10 ENFront Display Panel On the tape Shows you where you are BeginningOn-Screen Display VCR deck To recall an indication One Touch Replay Button pg , 42 m Skip Search Button pg How To Use12 EN Remote Connect the unit to TV Check the contentsConnect the unit to power source Situate the unit Set the VCR channel to off 8To connect to a TV with component video input connectors14 EN DVD deck only Select the DVD deck Scan Mode SetSwitch the mode Turn on the unit 16 EN Perform Plug & Play setupWhat to do if Plug & Play setting failed Plug & Play Set DVD deck Select the modeSelect the mode setting Monitor Set 18 EN Language Hightlight to on Screen Access the DVD Set Up menu screenLANGUAGE, then press 20 EN On the DVD Set Up menu screen as an exampleProcedure shows how to set Menu Language See Language Code List pg Language Code List Preparations Access the Clock Set screenClock Set 22 EN Manual Clock Set Semiauto Clock Set Auto Channel Set Access the Tuner Set screenTuner Set 24 EN To add channels Access the Manual Channel Set screenManual Channel Set Add or skip the desired channels 26 EN Basic Playback Activate frame-by-frame playback Slow MotionVariable Speed Search Pause during playback Instant ReView 28 ENSkip Search Index Search Activate Repeat Playback Next Function MemoryRepeat Playback One Touch Replay Soundtrack Selection Adjust the tracking manually30 EN Manual Tracking Pause/Resume recording Choose a programSet the tape speed Start recording Record One Program While Watching Another Instant Timer Recording ITREngage the ITR mode 32 EN Set the counter display Reset the counterTape Remaining Time Second Audio Recording Enter the program stop time Access the Program screen34 EN Enter the program start time Cable Box or DBS Receiver Users Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials Enter the channel position Press PROG. Check again Disengage the timer mode36 EN Press PROG. Check Press Timer To cancel or change a programCancel or change a program Return to the timer mode Select the program to modify Cancel or change program setting38 EN Confirm the overlapping programs Satellite Auto Recording You can also connect the cable box if it has a timer Press 8 Stop 40 ENLoad the disc Pause playback Locating the Start Point of the Item or Skip the Item Locating a desired scene using the DVD menuAccess the DVD menu Access the PBC menu Zooming 42 ENActivate frame-by-frame playback Select menu item Access the repeat modeSelect the repeat mode Access the on-screen bar Time Search 44 ENSubtitle Selection Svcd Select the audio settingAngle Selection Select the view angle 46 EN VFP function Adjusting the picture qualitySound Effect Select menu item How to Access the On-Screen BarAccess the status bar Access the menu bar Menu Bar Functions for SVCD/Video CD/Audio CD 48 EN Outline Control display Precautions Play 50 ENBasic Playback Select the group Zooming a still picture Group/File Selection 52 EN Edit From a Camcorder Start the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck Another Video Recorder 54 EN DubbingFrom DVD to VCR For the digital audio device Digital Audio DubbingPlace a disc and load a MD Prepare the audio device for dubbing 56 EN Make connections VCR deck Mode SetAccess the Function Set screen 58 EN For Example 60 EN When this function is set to on Press rt to select ON, then press Enter For each mode setting, see corresponding pagesLanguage Picture Audio Others Back to the beginning Press rt to move the hightlight to RESUME, then press Enter Audio Settings Picture Settings62 EN You dub audio of a DVD Video disc recorded with surround Select this when you enjoy multichannel surround audio byConnecting the unit’s analog Audio Output connector Surround multichannel audio Set the Child Lock Others SettingsChild Lock 64 EN On the Remote On the unit Lights up on the front display panel DVD indicator lights up on the frontPress DVD so that the DVD indicator 66 EN Recording cannot be started There is no cassette loaded, or Timer recording won’t work Incorrectly and $ on the front display 68 ENCheck the programed data and re Again To lock the disc tray VHS indicator disappears fromTray Lock Select a different host channel during Playback 70 EN Signal system Signal-to-noise ratio 45 dBHorizontal resolution Input/Output RCA connectors X 1, OUT x 72 EN Still Picture/Frame-By-Frame Playback Scan Mode Set DVD deck onlyWhen programs overlap each other Zooming 74 EN Page HR-XVC24S