JVC HR-XVC24S manual 34 EN, Access the Program screen, Enter the program start time

34 EN OPERATIONS ON VCR DECK (cont.)

Express Timer Programing

Before performing Express Timer Programing:

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch on the Remote to the right.

Slide to the right.

	VCR
	DAILY
	WEEKLY
	DATE +/–
START +/–	CH +/–
STOP +/–	TIMER
PROG
SP/EP
ENTER

Example: To timer-record the program from 8:00 PM to 10:00 PM on 24th December, on channel 12.

A Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VHS indicator lights up on the front display panel.

On the Remote

Press VCR so that the VHS indicator lights up on the front display panel.

B Access the Program screen.

Press PROG. (If you’re just starting out, “PROGRAM 1” appears.)

C Enter the program start time.

Press START +/– to enter the time you want recording to start.

● Press and hold START +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

D Enter the program stop time.

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

E Enter the program date.

Press DATE +/–.

●The current date appears on the TV screen. The date you enter appears in its place.