Filename [XVC24S_08DVD.fm]
Masterpage:Left+
46 EN
Page 46 28 February 2005 9:11 am
OPERATIONS ON DVD DECK (cont.)
Sound Effect
Using the Sound Effect function, you can change the sound field.
This function makes a human voice clearer.
This function works only for analog audio output.
1Access the selection menu.
Press SOUND EFFECT during playback.
The current setting appears on the TV screen.
2Turn on the Sound Effect function.
Press SOUND EFFECT to turn on the function.
Each time you press SOUND EFFECT, the Sound Effect
function turns on and off:
SOUND EFFECT:ONOSOUND EFFECT:OFF
The selection menu disappears if no operation is done for
about severalse conds.
NOTES:
The Sound Effect function works correctly only for a DVD
VIDEO disc recorded in the 5.1-channel audio format.
You may not feel the effect of this function well depending on
the source recorded on the disc.
VFP functionAdjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programing,
picture tone or personal preference.
1Access the VFP setting menu.
2Select the VFP mode.
Press we repeatedly.
Each time you press we, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
To adjust picture appearance manually
Only USER 1 or USER2 settings can be customized.
3Access USER menu.
Press we repeatedly to select USER1 or USER 2.
4Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
Adjust gradually and confirm picture appearance results are as
preferred.
VFP menu disappears and the following pop-up window
appears on the TV screen.
5Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
The current VFP settings appear again.
Repeat steps 4 and 5 to adjust other parameters .
To return to the normal screen
Press DVD PICTURE.
NOTE:
The VFP setting screen disappears if no operation is done for
more than about 10 seconds.
Press DVD PI CTURE during
playback.
The current setting appears on
the TV screen.
DVD PICTURE SOUND EFFECT
ENTER
Slide to the
right.
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
+3
NORMAL: Selec t this normally.
CINEMA: Suitable for movie.
USER 1/
USER 2:You can adjust parameters that affect picture
appearance and store settings. Go to step 3.
GAMMA
(3 to +3): Adjust this if the neutral color is bright or dark.
The brightness of dark and bright portions is
maintained.
BRIGHTNESS
(8 to +8): Adjust this if the picture is bright or dark on
the whole.
CONTRAST
(7 to +7): Adjust this if the objects in far and near
positions look unnatural.
SATURATION
(7 to +7): Adjust this if the picture is whitish or blackish.
TINT
(7 to +7): Adjust this if the appearance of flesh tone is
unnatural.
SHARPNESS
(8 to +8): Adjust this if the picture is indistinct.
0
GAMMA

0

GAMMA

XVC24S_01.book Page 46 Monday, February 28, 2005 9:24 AM