![](/images/new-backgrounds/1312960/31296061x1.webp)
EN 31
Basic Recording
●Turn on the TV and select the VCR channel (or AV mode).
●Slide the TV/VCR/DVD switchon the Remote to the right.
Load a cassette. | VCR/DVD | 7STOP 3PLAY |
|
EJECT | ¶REC | CH +/– |
Slide to the right.
VCR
Number keys
CH +/–
SP/EP
3PLAY
¶REC | 8PAUSE |
7STOP
A Load a cassette.
Insert a cassette with the record safety tab intact.
●The unit’s power comes on automatically and the counter is reset to 0:00:00.
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VHS indicator lights up on the front display panel.
On the Remote
Press VCR so that the VHS indicator lights up on the front display panel.
C Choose a program.
Press CH +/– or the number keys to select the channel you wish to record.
D Set the tape speed.
Press SP/EP. The current setting appears on the front display panel or TV screen. Press SP/EP again to change the setting while the tape speed is displayed on the TV screen.
E Start recording.
Press and hold 7 REC and press 4 PLAY on the Remote, or press 7 REC on the unit.
F Pause/Resume recording.
Press 9 PAUSE. Press 4 PLAY to resume recording.
●You can select channel during the Record Pause mode.
G Stop recording.
Press 8 STOP. Then press x EJECT on the VCR deck to remove the cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.
Record safety tab
NOTE:
When the end of the tape is reached during recording, the unit stops and “” and “$” blink on the front display panel.