JVC HR-XVC24S manual Recording cannot be started There is no cassette loaded, or

			EN 67
MP3/JPEG Files Playback (DVD deck)
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	A disc cannot be played.	● No MP3/JPEG files are recorded to the	Replace the disc.
		disc.
		● Files do not have the correct file	Add correct file extension (.mp3, .MP3,
		extension in their file names.	.jpg, .jpeg, .JPG, .JPEG, or any uppercase
			and lowercase combination) to their file
			names.
		● Files are not recorded in a format	Replace the disc. (Record files using a
		compliant with ISO 9660.	compliant application.)
		● The different types of files are recorded	The disc which contains the different types
		to the disc.	of files may not be played because of its
			disc characteristics or recording
			conditions.
2.	When playing back a disc which	● When playing back a disc which	Set “FILE TYPE” to either “AUDIO” (for
	contains both MP3 files and JPEG files,	contains both MP3 files and JPEG files,	MP3 files) or “STILL PICTURE” (for JPEG
	either MP3 files or JPEG files are	the selected files in the “FILE TYPE”	files) which you want to play back
	played.	setting are played back .	beforehand. ( pg. 62)
3.	The control display appears on the TV	● No MP3 files or JPEG files are recorded	Replace the disc. ( pg. 8)
	screen, but no operation can be	to the disc, or the disc is an unplayable
	performed.	disc (such as CD-ROM).
RECORDING (VCR deck)
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	Recording cannot be started.	● There is no cassette loaded, or the	Insert a cassette, or using adhesive tape,
		cassette loaded has had its record safety	cover the hole where the tab was
		tab removed.	removed.
2.	TV broadcasts cannot be recorded.	● “F-1” has been selected as the input	Set to the desired channel.
		mode.
3.	Tape-to-tape editing is not possible.	● The source (another video recorder,	Confirm that the source is properly
		camcorder) has not been properly	connected.
		connected.
		● All necessary power switches have not	Confirm that all units’ power switches are
		been turned on.	turned on.
		● The input mode is not correct.	Set the input mode to “F-1.”
4.	Camcorder recording is not possible.	● The camcorder has not been properly	Confirm that the camcorder is properly
		connected.	connected.
		● The input mode is not correct.	Set the input mode to “F-1.”
5.	“” and “$” on the front display	● The end of the tape was reached during	The program may not have been recorded
	panel won’t stop blinking.	recording.	in its entirety. Next time make sure you
			have enough time on the tape to record
			the entire program.
TIMER RECORDING (VCR deck)
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	Timer recording won’t work.	● The clock and/or the timer have been set	Re-perform the clock and/or timer
		incorrectly.	settings.
		● The timer is not engaged.	Press TIMER and confirm that “#” is
			displayed on the front display panel.
2.	Timer programing is not possible.	● Timer recording is in progress.	Timer programing can’t be performed
			while a timer recording is in progress.
			Wait until it finishes.