Bryan Boilers BE-210-WT4T7 manual Bryan Boilers, Indirect Water Heaters, Bryan Electric

Form No. 4800 (Rev. 11/06)

Bryan Electric

Indirect Water Heaters

98,300 to 1,081,100 BTUH

30 to 330 KW

Note these features:

Long life indirect heat exchanger and Incoloy sheathed electric heating elements

All brass and copper finned-tube, high-efficiency heat exchanger transfers heat from hot heater water to service water flowing through exchanger. This results in both long electric heating element and long heat exchanger life with trouble-free operation. Special Incoloy alloy also substan- tially contributes to electric element life as compared to copper sheathing used in conventional electric heaters.

Economical scale-free boiler operation

Scale-free operation means higher continuous heat trans- fer efficiencies and reduction of maintenance costs. Con- ventional electric heaters generally require periodic shut- down for descaling of elements. Bryan’s indirect closed system heating means little or no scale build-up.

Corrosion-resistant operation

Corrosive and scale forming service water does not come into direct contact with steel heater parts and electric heating elements. Service water being heated circulates only through the copper indirect heat exchanger within a temperature range that eliminates or minimizes chemical

Model BE-210-WT4T7

reactions such as oxidation or precipitation, the principal causes of corrosion and scale formation.

Condensation free

The Bryan indirect heater operates at water temperatures that eliminate problems caused by moisture from sur- rounding air condensing as water, contributing to rusting and wet floors.

Quality construction

Structural framework supports primary hot water vessel and power panel cabinet. Vessel and frame protected by

aheavy 16 gauge steel, zinc-coated jacket attractively finished with two coats of enamel.

Applications

Versatile for all typical commercial and industrial applica- tions, such as schools, apartments, hotels and motels, laundries, restaurants, hospitals, factories, etc. The heater may be used in conjunction with a storage tank (the tank and accessories may be supplied by Bryan as a packaged “Water-Pak”) or if the application permits, may be applied as a “tankless” installation. Available alternative to fossil fuel units when strict emission requirements must be met.

BRYAN® BOILERS