Bryant 331JAV warranty AIR DELIVERY- CFM With Filter, Installation

AIR DELIVERY— CFM (With Filter)

UNIT	BLOWER				EXTERNAL STATIC PRESSURE (IN. WC)
SIZE	MOTOR HP	SPEED	0.1	0.2	0.3	0.4	0.5	0.6	0.7	0.8
		High	1435	1385	1320	1265	1195	1145	1080	1000
036060	1/3 PSC	Med-High	1195	1165	1145	1105	1070	1015	955	885
		Med	1030	1020	1010	985	955	915	860	790
		Med-Low	900	890	875	855	835	795	755	690
		Low	705	700	690	675	655	625	580	525
		High	1855	1765	1710	1665	1580	1570	1410	1310
048080	1/2 PSC	Med-High	1595	1570	1530	1485	1410	1355	1280	1200
		Med	1355	1345	1305	1270	1220	1170	1110	1025
		Med-Low	1170	1170	1140	1110	1075	1025	965	890
		Low	880	865	855	830	805	755	720	655
		High	2235	2185	2110	2030	1950	1835	1700	1540
060100	3/4 PSC	Med-High	1995	1970	1915	1845	1765	1680	1545	1415
		Med	1735	1735	1675	1625	1565	1480	1370	1265
		Med-Low	1510	1500	1485	1455	1400	1320	1230	1130
		Low	1145	1140	1125	1115	1100	1085	1045	990

INSTALLATION

This unit is certified for downflow installation only. See Installation Manual for

important installation instructions.

MINIMUM INCHES CLEARANCE TO COMBUSTIBLE CONSTRUCTION

This forced air furnace is equipped for use with natural gas at altitudes 0 - 10,000 ft

(0-3,050m).

This furnace is approved for DOWNFLOW installations only.

1"

An accessory kit, supplied by the manufacturer, shall be used to convert to propane gas use or may be required for some natural gas applications.

This furnace is for indoor installation in a building constructed on site.

This furnace may be installed on combustible flooring in alcove or closet at minimum clearance from combustible material.

This furnace may be used with a Type B-1 Vent and may be vented in common with other gas-fired appliances.

†	For installation on non-combustible
	floors only. For installation on
	combustible flooring only when

0"

B A C K

	E
I	D
S

1" #

TOP / PLENUM			E	1" #
			D
E		S	I
C
A
N
R
U
F	T
	N
O
R
F
		S E	R V I
F R O				C E 30"
	N T
				MIN

##

Ø

installed on special base, Part No.

KGASB0201ALL, Coil Assembly,

Part No. CD5 or CK5, or Coil

Casing, Part No. KCAKC.

# For furnaces wider than 14.25

inches (362mm) may be 0 inches.

Ø18 inches front clearance required

for alcove.

##For single wall vent type 6 inches.

Clearance in inches.	BOTTOM	E (LIT)
	†	REV.
	1"
Vent Clearance to combustibles:		-101
For Single Wall vents 6 inches (6 po).		322567

For Type B-1 vent type 1 inch (1 po).

			A97620
		SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
		UNIT MUST BE INSTALLED IN ACCORDANCE
		WITH INSTALLATION INSTRUCTIONS
	—4—		Cancels: PDS 331J.60.3
© 1999 Bryant Heating & Cooling Systems, 7310 W. Morris St. Indpls., IN 46231		PRINTED IN U.S.A.	Catalog No. 5233-103 10-99