approximately 7 hours. WILL NOT DETECT CO.

Display Readings

DC Powered in Battery Backup Operation

Display Shows

Alarm Sound Unit Status Unit Condition Recommended

 

Action

“0” or CO

1 “chirp” every

concentration

15 seconds

and “Lb” dis-

 

played once

 

every 60 sec-

 

onds, flash-

 

ing dot every

 

second.

 

Battery conserve

Battery is partial-

Confirm battery

connection is

mode, sensing

ly discharged,

fully seated &

for CO.

after 5 minutes

oriented prop-

 

of operation on

erly. Connect to

 

battery backup.

AC power to

 

 

fully charge

 

 

battery. Contact

 

 

Kidde customer

 

 

service if condi-

 

 

tion continues.

Flashing dot

1 “chirp”

Unit in trouble

once every

every 60 sec-

alarm. Mode will

60 seconds.

onds

continue for

Operation on

Confirm battery

connection is

battery backup

fully seated &

and battery is

oriented prop-

fully dis-

erly. Connect to

charged.

AC power to

 

fully charge

 

battery. Contact

 

Kidde customer

 

service if condi-

 

tion continues.

None.

None.

Unit is not

Battery discon-

Confirm battery

connection is

 

 

operational.

nected or miss-

 

 

fully seated &

 

 

WILL NOT

ing.

 

 

oriented proper-

 

 

DETECT CO.

 

ly. Connect to

 

 

 

 

AC power to

 

 

 

 

fully charge

 

 

 

 

battery. Contact

 

 

 

 

Kidde customer

 

 

 

 

service if condi-

 

 

 

 

tion continues.

If at any time you test the alarm and it does not perform as described, have it replaced immediately.

Li-Ion Battery Handling Precautions

Handling

Do not use the battery for a purpose other than for the alarm it is specified.

Do not recharge the battery using any charging circuit other than the one provided in the alarm. A recharging operation under non- conforming recharging conditions can cause electrolyte leakage, overheating, smoke emission, bulging/bursting and/or ignition.

Do not discard the battery into fire or heat it under any circumstances. Otherwise, it may cause the battery to explode. Do not connect the battery to an electrical outlet.

Do not connect the positive and negative terminals of the bat- tery with any conductor such as metal wires. Do not store the battery or transport it together with any metal objects.

28

Page 32
Image 32
Bryant KNCGPP3RC manual Li-Ion Battery Handling Precautions, Detect CO