Quick Start Set the Clock and Go
MODE
Press the Mode button. While holding the Mode,
During Setup & Programming: Pressing the Mode button
FAN
press the Fan button for 2 seconds to enter Setup screens.
selects different flashing items. (Represented in dark black)
| 12:00Am | Setup | i |
|
|
| |||
|
|
|
| |
|
|
|
|
|
Setup 2
S
Press both Mode and
Fan buttons as | MODE | |
above to return to | FAN | |
normal operation. | ||
|
Pressing the Up and Down buttons will modify the flashing selection.
To adjust the
Press clock or Day use
MODE
buttons.
The Thermostat is preprogrammed from the factory to operate 1 or 2 Stage equipment* without the need for further programming. To optimize the installation of this thermostat follow the instructions in the Advanced Setup section.
*The thermostat is not preprogrammed from the factory to operate electric heat or heat pump
systems. To control these systems, follow the steps in the Wireless Receiver Instructions.
Page 5
