Quick Start Set the Clock and Go
SET CLOCK
Press the Set Clock button to enter Setup screens.
During Setup & Programming: Pressing the Mode button selects different flashing items. (Represented in dark black)
I2:00AM | Setup I |
Mo | Setup 2 |
Press the SET CLOCK
button to return to | SET CLOCK |
normal operation. |
|
Pressing the Up and Down buttons will modify the flashing selection.
To adjust the
Press clock or Day use
MODE
buttons.
The thermostat is preprogrammed from the factory to operate 1 stage of cooling or 2 Stages of heating equipment* without the need for further programming. To optimize the installation of this thermostat follow the instructions in the Advanced Setup section.
*The thermostat is not preprogrammed from the factory to operate electric heat or heat pump systems.
To control these systems, follow the steps in the Advanced Setup section, pages 11 & 12.
Page 5
