Bryston SP1.7PRECISION manual Menu Control Buttons, Source Selection Buttons and Indicators

SEL

6. Menu Control Buttons

These three buttons labeled “<”, “>”, and “SEL” (SELECT) are used to control the menu/setup functions displayed on the LCD. To enter a menu mode, you can press any one of these buttons. This will bring up the main menu.

Navigating any menu or sub-menu is done using the two arrow (< >) buttons. Once the desired submenu or function is high- lighted, pressing “SELECT” will make it the current menu or function.

To exit a menu, or back up a step use the arrow buttons (< >) to highlight the ‘X’ displayed in the lower right hand corner of the LCD window and press “SELECT”.

TV/SAT DVD CD AUX VCR TAPE

7.Source Selection Buttons and Indicators

Pressing any one of these buttons will instantly switch the SP1.7’s analog and digital inputs to read the indicated source.

If the SP1.7 is in its digital mode, as soon as any input is selected and switched, the decoder will automatically try to determine the new bitstream’s type and mode.

6