IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insu- lated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte- nance (servicing) instructions in the literature accompanying the product.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT.

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE.

THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

BRYSTON LIMITED WARRANTY

Bryston analog audio circuits are warranted to be free from manufacturing defects for twenty (20) years from the original date of manufacture. The warranty includes parts and labour.

Bryston Digital circuits and cables are warranted for five years from the original date of manufacture. The warranty includes parts and labour. Bryston products having motorized moving parts, excluding motorized volume controls, are warranted for three years from the original date of manufacture. The warranty includes parts and labour.

Bryston will remedy the problem by repair or replacement, as we deem necessary, to restore the product to full performance. Bryston will pay return shipping during the first three years of warranty coverage.

The warranty is fully transferable to the original owner and all subsequent owners during the warranty period. Warranty coverage is automatic and commences with the original date of manufacture which is kept on file at Bryston. In the event of a defect or malfunction, contact Bryston’s repair centers for return authorization. Products must be returned using original packaging material only. Packing material may be purchased from Bryston if necessary. This warranty is considered void if the defect, malfunction or failure of the product or any component part was caused by damage (not resulting from a defect or malfunction) or abuse while in the possession of the customer. Tampering by persons other than factory authorized service personnel or failure to fully comply with Bryston operating instructions voids the warranty. This warranty gives you specific legal rights and you may also have other rights which may vary from province to province and country to country.

BRYSTON SERVICE in CANADA:

BRYSTON SERVICE in the USA:

Postal address:

P.O. BOX 2170, Stn. Main

79 COVENTRY ST., Suite 5

 

PETERBOROUGH, ONTARIO

NEWPORT, VERMONT

 

CANADA K9J 7Y4

U.S.A.

05855-2100

Courier address: 677 NEAL DRIVE

 

 

 

PETERBOROUGH, ONTARIO

PHONE:

802-334-1201

 

CANADA K9J 6X7

FAX:

802-334-6658

PHONE:

705-742-5325

E-mail:

usaser@bryston.ca

FAX:

705-742-0882

 

 

E-mail:

cdnser@bryston.ca

 

1

 

 

 

BRYSTON SERVICE outside Canada and the USA:

contact your local distributor or

 

CHECK OUR WEB SITE:

www.bryston.ca

E-MAIL BRYSTON DIRECTLY:

cdnser@bryston.ca

FAX BRYSTON DIRECTLY:

01-705-742-0882

PHONE BRYSTON DIRECTLY:

01-705-742-5325

Page 1 Page 3
Page 2
Image 2
Bryston SP2 PREAMP owner manual Bryston Limited Warranty, Important Safety Instructions
Page 1 Page 3

SP2 PREAMP specifications

The Bryston SP2 preamplifier stands as a hallmark of high-performance audio engineering, designed to deliver an exceptional listening experience to audiophiles and home theater enthusiasts alike. This remarkable component is not only a testament to Bryston's commitment to quality but also incorporates advanced technologies that cater to a wide range of audio applications.

One of the standout features of the SP2 is its extensive connectivity options. The preamp offers multiple analog and digital inputs, including balanced XLR, unbalanced RCA, and a variety of digital formats such as coaxial, optical, and USB. This versatility allows users to seamlessly integrate the SP2 into their existing audio systems, accommodating a plethora of sources ranging from traditional vinyl players to modern digital streamers.

Incorporating advanced digital signal processing (DSP), the SP2 also features room correction capabilities, enabling users to tailor their audio experience to the unique acoustics of their space. This technology optimizes the sound output, ensuring that every note and nuance is delivered with precision, regardless of environmental factors. Users can benefit from improved spatial imaging and clarity, leading to a more immersive soundstage.

The SP2 also boasts a high-quality D/A converter, which enhances audio playback realism. Capable of decoding high-resolution audio formats, it ensures that even the most intricate details in a recording are accurately reproduced. With support for sample rates up to 192 kHz, the SP2 promises a listening experience that is both engaging and true to the original recording.

Another prominent feature of the Bryston SP2 is its customizable processing options, including bass management and surround sound processing. This allows for an optimized audio experience whether listening to music or immersing in a cinematic adventure. The flexibility of adding or bypassing various sound modes provides users with extensive control over their audio experience.

Built with Bryston's renowned reliability, the SP2 is constructed with premium components that provide durability and long-lasting performance. The design ethos emphasizes both elegance and functionality, making it an attractive centerpiece for any audio setup.

In summary, the Bryston SP2 preamp combines advanced technologies and thoughtful design to create a powerful audio tool. With its extensive connectivity options, superior D/A conversion, DSP capabilities, and robust build quality, the SP2 sets a high standard in the realm of audio preamplifiers, making it an ideal choice for enthusiasts seeking an unparalleled listening experience.
Top Page Image Contents