Bryston technical specifications SP 1.7 Technical Specifications

SP 1.7 Technical Specifications

Source Selection: Accomodates 11 sources, up to 4 of which may be digital inputs

Digital Inputs: 4 coaxial S/PDIF (RCA), 2 of which may be assigned to optical S/PDIF (TOSLINK)

Digital Inputs (Pro model): 1 AES/EBU, 4 coaxial S/PDIF (RCA)

Stereo Analog Inputs: 6 stereo pairs (RCA)

Discrete 5.1 Analog Inputs: 6 unbalanced (RCA) for Left, Centre, Right, Right Surround, Left Surround, and Subwoofer

Main Audio Outputs: 6 unbalanced (RCA) and 6 bal- anced (XLR) for Left, Right, Centre, Right Surround, Left Surround, and Subwoofer

Additional Outputs for ES/EX 6.1/7.1: Left Rear, Right Rear (RCA)

Audio Record Outputs: 2 stereo (RCA) pairs from any analog input

Frequency Response: 20Hz to 20kHz +/- 0.25 dB

THD & Noise (20Hz to 20kHz at 3V output level): Less than 0.006% in all modes; below 0.0025% in Bypass mode.

Signal-to-Noise Ratio: Not less less than 100dB in all modes; 110dB in Analogue Bypass Mode (Ref. 1V input, maximum gain, 22kHz bandwidth).

Input Level: maximum 2 Vrms in DSP modes, 4Vrms in Bypass Mode

Output Level: 8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode

Output Impedance: 110 Ohms

D/A, A/D Conversion: Crystal Semiconductor 24-Bit Delta-Sigma

DSP Engine: Motorola

Bass Management: 2nd Order high-pass filter (x5), 4th Order low-pass filter; Crossover Frequencies 60, 70, 80, 90, 100, 110, or 120 Hz

Display: Two-line, 16-alphanumeric characters per line, black-on-green

Trigger Outputs: One 12V on/off trigger; one 12V programmable

Power Requirements: 100VAC, 115VAC, and 230VAC models

Remote Functions: Power, master volume, source switching, mode switching, mute, and trims (in test mode)

Control Port: RS-232 (bidirectional, D9 connector) port for integration of external control systems (AMX, Crestron, and others using character-based proto- cols), and for control of external video switchers

Aux. Infrared Receiver Input: Mini-phone jack

XLR Configuration: Pin 1 ground, pin 2 positive, pin 3 negative

Front Panel: Silver or Black; 17”-wide for shelf mounting or 19” rack panel (2 RU, 3.5”/8.9cm. high)

Weight: Approx. 22 lbs (10 kg) Dimensions (including rubber feet):

Shelfmount 17”x13.5”x3.8”, 43.2cm. x 34.3cm. x 9.7cm. Rackmount 19”x13.5”x3.8”, 48.3cm. x 34.3cm. x 9.7cm.

Canada’s largest independent manufacturer of high-end audio electronics

for consumers and professionals. Founded 1962. Visit our website:

www.bryston.ca

20-YEAR WARRANTY

Unlimited, unprecedented, unequaled

Bryston Limited P.O. Box 2170, 677 Neal Drive, Peterborough, Ontario Canada K9J 7Y4 1-800-632-8217