BT 1100 manual Registering your handset, To register an additional handset

Quartet 1100 User Guide – Edition 5 – 17.8.00

Using Quartet 1000 Additional Handsets

You can buy and use up to 3 Quartet 1000 additional handsets with your Quartet 1100 to extend your phone system, without needing to install extension sockets for each new phone.

Each additional handset is supplied with its own charger and user instructions, but the following information will tell you how to register and use an additional handset with your Quartet 1100.

Note

You must charge your additional handset for 24 hours before registering it.

To register an additional handset

Place the handset you wish to register on the base unit and then remove it.

Press and hold the base Page unit PAGE button for

5 seconds until both the POWER/IN USE light on the base unit and the

IN USE/BATTERY LOW light on the handset begin to flash.

Page	Release the PAGE button
	and press the TALK button
	on the handset.

Registering your handset

You must register your Quartet additional handset before it can be used with your Quartet base unit. Make sure that each additional handset is registered with a different number (2, 3 or 4) so it can be identified from other additional handsets, see page 19.

Your additional handset is registered automatically and you will hear a long confirmation beep and the IN USE light will stop flashing.

18