BT 1100 manual To dial a number in the Quickdial memory, To delete stored numbers

Quartet 1100 User Guide – Edition 5 – 17.8.00

1 2 3 Enter the telephone number you want to store.

uickdi		Press the QUICKDIAL
Q	al

button to confirm.

You will hear a confirmation tone.

Note

There is a quickdial memory label included in your packaging. You can use this to keep a record of which location number you have used for each telephone number.

Remove backing from memory label and place centrally into handset cradle on base unit as shown.

To dial a number in the Quickdial memory

		Press the TALK button.
uickdi		Press the QUICKDIAL
Q	al
		button.

Enter the location number 0-9between 0 and 9, under

which the number is stored.

The number is dialled automatically.

To delete stored numbers

Any existing number stored in the One touch or Quickdial memories can be overwritten by entering a new number under the same location. Simply follow the steps under the storing numbers sections previously shown.

To adjust the handset ringer volume

You can adjust the handset ringer volume when the handset is not in use.

There are 3 settings, HIGH, LOW and OFF.

The default setting is HIGH.

▼Press the DOWN button to reduce the volume.

To switch the ringer volume

▼OFF, press the DOWN button and hold for 2 seconds until you hear a confirmation beep.

To adjust the volume, press

▲and release the UP button. The ringer will be set to the LOW level.

▲Press and release the UP button again to set the volume to HIGH.

You will hear a sample ring on each press.

14