BT 1500 manual To adjust the base ringer volume, To use Call Waiting

Quartet 1500 User Guide ~ 3rd Edition ~ 27th November ’01 ~ 4197

To adjust the base ringer volume

There are 3 levels to choose from, HIGH, LOW and OFF.

1 = HIGH, 2 = LOW and

3 = OFF. The default setting is HIGH.

uickdi
Q	al

Press the QUICKDIAL button.

Press the # button.

Enter the setting you want, from 1 to 3.

You will hear a sample ring of the base ringer at levels 1 and 2.

uickdi		Press the QUICKDIAL
Q	al

button to confirm the setting.

You will hear a confirmation tone.

Call Waiting

Note

To use Call Waiting you will need to subscribe to the Service from your network provider. A quarterly fee is payable.

If an incoming call arrives while you are already engaged on a telephone call, you will hear a soft beep every 5 seconds (this beep is not audible to the person you are speaking to).

Instead of the engaged tone, the second caller will hear an announcement to hold as you are aware that there is a second call.

To use Call Waiting

You can answer the second call, without disconnecting your first caller, by pressing

Rthe R button. The first caller will be put on hold.

When you have spoken to the second caller you can return to the first caller by

Rpressing the R button again. You can switch back and forth between the 2 calls without disconnecting either if you wish.

If you wish to disconnect the first call, press the TALK button after speaking to the first caller.

The handset will then ring. Press the TALK button again and continue with the second caller.

The second caller will only be charged for their call from the moment you answer and not while they are waiting for your initial contact.

16