BT Studio 1500 – Edition 3 – 27.07.04 – 5876
56Help
Many common problems are caused by the telephone and power cables being incorrectly connected, not connected at all, or the power being turned off.
Please check that your BT Studio 1500 has been correctly set up, see page 6, before ringing the BT Studio 1500 Helpline.
Problem | Possible cause | ||||
|
|
|
|
|
|
No display | The batteries may be flat or dead. | ||||
| Recharge or replace the batteries, see page 7. | ||||
|
|
|
|
|
|
No dial tone | Is the telephone line cord plugged into the telephone | ||||
| wall socket? | ||||
| Check that the base station is connected to the mains | ||||
| power and switched on. | ||||
|
|
|
|
|
|
You cannot link up | Is the |
|
|
| icon flashing in the display? |
| |||||
with the base station | The mains power cable may not be connected at the | ||||
| |||||
| base or switched on. | ||||
| Are you in range of the base? Move closer to the base. | ||||
| The batteries could be low or flat. | ||||
| Recharge or replace the batteries. | ||||
|
|
|
|
|
|
