BT 2100 10 M1 M3 memory buttons, Store/replace a one touch number, Dial a one-touch memory number

10M1 – M3 memory buttons

Each number can be up to 32 digits long and can include a pause or #.

If you enter more than 32 digits you will hear an error beep.

To enter a pause when storing a number

press .

To cancel while storing, hang up the handset

or press . Any number already stored will be kept.

You can store your 3 most frequently used phone numbers on the one-touch memory

buttons (, and ) and dial them by pressing a single button.

Store/replace a one touch number

1.Lift the handset, or press , to get a line.

2.Press and hold the , or button you want until you hear a beep and the Secrecy light flashes.

3.Enter the number you want to store.

4.Press the same , or button to confirm. The number is stored. You hear a confirmation beep.

Dial a one-touch memory number

1.Lift the handset, or press , then press the one-touch button you want. The stored number is dialled.

Storing a pause in a number

A pause is normally inserted in a stored telephone number after a switchboard access code (e.g. 9) to allow the switchboard time to get an outside line before the number is dialled. For example, 9 – Pause – 08702405522.

1. To enter a pause, press in the appropriate place when storing the number.

Delete a stored number

1.Lift the handset, or press , to get a line.

2.Press and hold the , or button you want until you hear a confirmation beep and the Secrecy light flashes.

3.Press to delete the stored number. You hear a confirmation beep.

4.Replace the handset or press .

If you experience any problems, please visit www.bt.com/producthelp