BT 3010 Classic manual To register a Diverse Classic handset, At the handset, At the base station

Diverse 3010 User Guide 22/3/01 1:34 pm Page 43

Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722

Registering a new Diverse 3000 Handset with the base station

Up to six handsets can be registered and operated from the Diverse 3010 Classic base station. The system allows you to make internal intercom calls between two handsets while a third is making an external call.

Each additional handset you purchase must be registered at the base station.

Note

If you are registering a Diverse 3000 Executive Handset follow the instructions in the Diverse 3000 Executive Handset user guide.

To register a Diverse Classic handset

At the handset:

Press the SET button.

INT Press the INT button.

✱Press the ✱ button. The base station numbers are displayed.

1-4	Enter the number of the base
	station you want 1-4.

1

KEYPAD

(Enter 1 for the base station when registering for the first time. When registering the handset at additional base stations, enter 2, 3 or 4 as necessary.)

Press the OK ( ) button.

Enter the base station PIN (original setting 0000).

Press the OK ( ) button. The flashes.

At the base station:

Press and hold down the PAGE button on the base station (for about 10 seconds) until you hear the tone.

At the handset:

Display shows the handset numbers available, eg – 2, 3, 4,

5, 6.

N.B. There is a small delay before these numbers are displayed on the screen.

Select and enter one of these numbers. This is now the handset’s internal number and it is registered with the base

station. The stops flashing

REGISTERING

43