Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

Setting up

Plan the location

Situate your Converse 325 close enough to a phone socket so that the line cord will reach.

Your Converse 325 can be wall-mounted. See Wall-mounting’,on page 20.

Note

When your batteries are within about two weeks of total exhaustion, BATT LOW will appear in the display. If you do not replace the batteries and they become totally discharged your Converse 325 will not display anything on the screen.

1Insert the batteries

The display on your Converse 325 is powered by 3 x AAA alkaline batteries.

Make sure the phone is not plugged into the phone socket. Open the battery compartment cover.

Insert batteries as shown.

+ - +

- + -

Close the lid and replace the compartment cover.

2Plug your Converse 325 into the phone socket

3Check the dialling mode

Your Converse 325 should be pre-set to T-TBwhich gives you TONE dialling.

This ensures the phone will work with all modern digital exchanges.

If your phone does not work when you dial a number, try setting the dialling mode to T or P.

SETTING UP

5

Page 6
Image 6
BT 325 manual Setting up, Plan the location, Insert the batteries