Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

To adjust the ringer volume

 

 

There are 3 volume settings to

 

 

choose from: HI, LOW or OFF.

 

 

Use the ringer volume switch

 

 

on the underside of your

 

HI

Converse 325 to set the volume

 

 

 

 

LOW

you want: HI, LOW or OFF.

 

OFF

 

 

 

 

 

Note

 

 

 

 

 

When using the handset or a headset:

Press the Amplify button.

Press the VOL + or VOL - button to increase or decrease the volume.

One-Touch and Two-Touch memories

The call indicator light will flash regardless of the ringer setting chosen.

To adjust the ringer tone

You can store 20 telephone numbers in your Converse 325. 10 in the One-Touch memory and a further 10 in the Two-Touch memory.

Please note that stored numbers can be no longer than 21 digits.

USING

R1

R2

RINGER

The ringer tone can be set to High or Low.

Use the ringer tone switch on the underside of your Converse 325 to set the ringer tone you want: R1 for LOW or R2 for HIGH.

To store a One-Touch number

Use the label to keep a note of each One-Touch and Two-Touch numbers.

Note

To adjust the call volume

During a call, you can adjust the volume of a call.

When using Handsfree:

Press the VOL + or VOL - button to increase or decrease the volume.

One-Touch memory buttons 6-10 (the bottom 5 buttons) are pre-set with BT Select Services numbers (see ‘Using Select Services’). These can be overwritten if you wish by following the instructions below.

Press the Store button.

10

Page 11
Image 11
BT 325 One-Touch and Two-Touch memories, To adjust the ringer volume, To adjust the ringer tone, To adjust the call volume