PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 11

5Connect the mains power

IMPORTANT NOTE

Before connecting to the mains power remove the red tag marked “REMOVE before plugging in” by pulling in the direction of the arrow.

Plug into the mains power and switch on.

The fax will automatically carry out a short test to check the functions of its components and the following messages will appear in the display:

AUTOMATIC RX

CHECK PRINT HEAD and alternating

SET DATE/TIME

6.Load paper

The plain paper sheet feeder can hold up to 40 sheets of 80gsm paper.

It can accommodate A4 (210 x 297mm), US Letter (216 x 279mm), and US Legal (216 x 356mm) and weights between 70-90gsm.

Maximum Level

Place the paper in the sheet feeder. Do not force it in.

Use the paper width adjustment lever to push the paper against the left side of the feeder.

NOTE

When you need to add more paper, always slide it under the paper that’s already loaded.

11

Page 11
Image 11
BT 50e manual Connect the mains power, Load paper, Automatic RX, Check Print Head and alternating, Set Date/Time