Switchboard external line

access code

You may need to enter an access code (e.g. 9) in order to
get an outside line. So that the switchboard has time to
pick up an outside line, you may also need to add a
Pause after the access code.
A Pause lasts 3 seconds. You can Pause dialling at any
time by pressing the button.
To insert a pause
1. Begin storing a number and press and hold where a
pause is needed. P is shown in the display.

Recall

The button is used when connected to certain
switchboards, e.g. to transfer calls, and for some
BT Calling Features or those services available via your
network provider.
Freestyle 610 – Edition 3 – 07.04.06 – 7332
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Switchboard use
43
For more information on storing
numbers see ‘Store a phonebook
entry’ on page 19.
Pause
You may also need to insert a
pause when storing international
dialling codes, charge card
numbers and with other tele-
banking facilities.
Switchboard compatibility
This product is intended for use
within the UK for connection to
public telephone network and
compatible switchboards, which
support tone dialling and timed
break recall. If in doubt please
consult your network service
provider.