Many common problems are caused by the telephone and power cables being incorrectly
connected, not connected at all, or the power being turned off. Please check that your
BT Freestyle 610 has been correctly set up, see page 6, before ringing the BT Freestyle
610 Helpline.
No display
The batteries may be flat or dead. Recharge or replace the batteries, see page 7.
No dial tone
Is the telephone line cord plugged into the telephone wall socket?
Check that the base station is connected to the mains power and switched on.
You cannot link up with the base station
Is the icon flashing in the display?
The mains power cable may not be connected at the base or switched on.
Are you in range of the base? Move closer to the base.
The batteries could be low or flat.
Recharge or replace the batteries.
No ring on the handset
Check that the base station is plugged into the phone socket and that the mains power is
switched on.
The ringer volume may be set too low for you. See page 27 to adjust the volume.
Freestyle 610 – Edition 3 – 07.04.06 – 7332
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Help45