BT 6170 Using the headset

BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170
Important
Before using your headset, it must be paired with a Bluetooth phone/device.
You must also be within 10 metres of the paired Bluetooth phone/device.
Connecting with other Bluetooth devices
Once paired and switched on, your BT Prelude 20 headset will automatically link with your BT Prelude phone
when it is within range. However, with some other phones/devices you may need to establish the link each time.
A link is usually established either by:
Selecting Establish Bluetooth Connection(or similar) on your Bluetooth phone/device.
Or
Pressing the headset’s button when it is in standby.
If the link is successful, the green indicator light will flash rapidly every 3 seconds.
Switch headset on
1. Press and hold on the headset until the green light starts flashing quickly and the
headset beeps.
The headset is switched on and in standby mode.
Using the headset8
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 8