BT 90 manual Setting the handset number, Press the button four times, Press and release

Freestyle 90/130/1200 Additional Handsets

To erase a registration code

•Press the QUICKDIAL button.

•Press the CHANNEL SEEKER button.

•Press the ✱ button four times.

•Press the QUICKDIAL button. You will hear a confirmation beep, the old registration code is now erased and you can re- register your additional handset following the procedure above.

To re-register an additional handset

If necessary you can re-register your additional handset by simply following the steps described in ‘To register an additional handset’on the previous page.

Before re-registering the old registration code must first be erased.

To check that your additional handset is registered correctly

•Lift the additional handset.

•Press the TALK button.

•Listen for the dial tone.

If you do not hear a dial tone, your additional handset is either out of range of your Freestyle 90, the Freestyle 90 phone line cord is not plugged in, it has not been registered properly or you may have purchased the wrong

handset - check that the handset you have is item code: 871267. This can be found on the side of your giftbox.

Setting the handset number

Each additional handset must be assigned an identity number (1, 2, 3 or 4). Your Freestyle 90 handset is already numbered as HANDSET 1, additional handsets can then be numbered as they are added.

Your Freestyle additional handset is pre-set to handset number 2.

To set a handset identity number

•Press and release the

QUICKDIAL button.

•Press and release the SECRECY button.

•Enter the identification number (1-4) using the keypad.

•When you have entered the number press the QUICKDIAL button.

•You will hear a beep confirming that the new number has been stored.

Make a note of the identification number by writing it on the handset’s directory label.

20