62
BTDiverse 6110 ~ Issue 2 ~ Edition 1 ~ 06.04.05 ~ 6794
Help
No display appears
■The handset may be switched off.
■Press and release the button to switch the handset on.
■The batteries may be flat, dead or incorrectly inserted. Recharge, replace or renew the
batteries.
No dial tone
■Make sure your handset is registered to the base and within range of the base.
■Is the telephone cord of the base plugged into the phone socket?
■Check that the base station is connected to the mains power and switched on.
You cannot link up with the base station
■Does the display show Out of Range? If so, you are out of range of the base the
handset is registered to or power is off at the base.
■Batteries could be low or flat.
■If using more than one base station, check that you have the correct base selected.
Handset does not ring
■The ringer volume may be switched off (if it is there will be a icon on the display).
Press and hold to switch it off and on. To adjust the ringer volume on the handset,
see page 48.