Using your Diverse 2015 answering machine
To hear incoming calls
Make sure the speaker volume is set to an audible level. The default setting is ON.
| # | INT | WXYZ |
STO | 9 |
•Press the STO button.
•Press the # button.
•Press the INT button.
•Press the 9 button.
•Enter the code 41 to switch the loudspeaker on for incoming messages.
or
•Enter the code 42 to switch the loudspeaker off for incoming messages.
•Press the STO button to confirm the setting.
Note
You will not hear the outgoing message, unless you press the volume buttons whilst answering.
To adjust the loudspeaker volume
+–
At the base during playback:
•Press the + button to increase volume.
Or
•Press the – button to decrease volume.
The setting is stored until adjusted again.
To intercept a call during message recording
You can interrupt a call from a handset or a parallel corded telephone while your outgoing message is being played or while a caller is leaving their message.
•Press the PHONE button or take
the handset off the base. Or
•Pick up the handset of a parallel phone.
The answering machine stops recording and resets to Answer On and you can take the call.
34
