Buffalo Technology HDS-PHU2 Series user manual Manager

●This device can be hot-plugged.

This means you can plug and unplug the USB cable of the device to and from a computer when both devices are on.

CAUTION Never unplug the USB cable while the hard drive is being accessed (the power/access indicator is blinking orange), as this can damage the recorded data on the hard drive.

●To use this device in a configuration with multiple USB devices, use a USB hub (not supplied) or similar device.

●Be sure to read the manuals of the computer and peripheral equipment.

●This device cannot be used to boot the operating system.

●Do not place other objects against this device. This can damage the device.

●In Windows XP and Vista, if this device is connected to a USB 1.1 port, the [HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub] warning message may appear. To continue operations, click [X] to close the dialog box.

●This device may emit a sound during operation, such as at startup and when accessing the hard drive. This is normal.

●Installing the drivers of this device adds the following devices to to the Device Manager*.

* Use the following procedures to display the Device Manager.

Windows Vista	Click [Start]  right-click [Computer]  click [Manage]  click [Continue]
	when [Windows needs your permission to continue] appears  click [Device
	Manager]
Windows XP	Click [Start]  right-click [My Computer]  click [Manage]  click [Device
	Manager]
Windows 2000	Right-click [My Computer]  click [Manage]  click [Device Manager]
Operating System	Location Added	Device Name
	Universal Serial Bus controllers	USB Mass Storage Device
Windows Vista	Disk drives	BUFFALO Disk Drive USB Device
	DVD/CD-ROM drives	BUFFALO USB-ATA Bridge USB Device
	Universal Serial Bus controllers	USB Mass Storage Device
Windows 2000/XP	Disk drives	BUFFALO Disk Drive USB Device
	DVD/CD-ROM drives	BUFFALO USB-ATA Bridge USB Device

HDS-PHU2Series User'�s Manual