Buffalo Technology WHR-G300N user manual Troubleshooting, Common Problems, DIAG LED Activity

Models: WHR-G300N WHR-G300N-US

1 48
Download 48 pages 26.34 Kb
Page 27
Image 27
Troubleshooting

Troubleshooting

Common Problems

Out of range, client cannot connect to the AirStation.

Configuration mismatch, client cannot connect to the AirStation.

Absence or conflict with the Client Driver.

Conflict of another device with the AirStation hardware.

LED Activity

Monitoring LED activity helps identify problems.

Power LED should be Green when the AirStation is on.

The Security LED lights when encryption or authorization is turned on.

Wireless LED should be Green if the line is active. If is it blinking Green, wireless communication is active.

Router LED should be Green (100Mbps) or Amber (10Mbps) while communication is active.

The Red Diag LED will flash during boot and firmware updates.

DIAG LED Activity

Unplug the power for three seconds. Plug the power back in to monitor the Diag LEDs during start-up.

27

Page 27
Image 27
Buffalo Technology WHR-G300N-US user manual Troubleshooting, Common Problems, DIAG LED Activity