Connect the AirStation to your existing LAN
Once configuration is complete, connect the AirStation to your existing Local Area Network. Plug the provided 7ft. Ethernet cable into the 10/100M Ethernet port on the AirStation 54Mbps Compact Repeater Bridge and plug the other end into an Ethernet hub or switch on your Local Area Network.
Once the AirStation is connected to the existing LAN, users accessing the LAN through the AirStation must configure the computer’s TCP/IP Settings to
match your existing LAN.
Contact your network administrator if your computer requires a static IP Address or if using DHCP Services.
This completes the basic AirStation Configuration. To change advanced settings consult the User Manual located on the Utility CD or the Buffalo Support Web Site: http://www.buffalotech.com/wireless/support.
MAC Address forWDS Mode
The Wireless MAC address is a 12- digit code comprised of numbers and let- ters and is located on the rear of the
AirStation.
The Wireless MAC Address is used for
WDSfunctionality.
6
