4
5
6
7
8
9
In the Look In: field, select 3½ Floppy (A:). The file name (e.g., Airstation.Apd) is selected and click the Open button.
The AirStation application will be displayed as unavailable.
With the AirStation application displayed as unavailable, select the AirStation to which you want to connect. Select File and Connect.
Click the OK button.
If you wish to set a password using the WEP key, enter your password in the Password field.
Windows will search for the AirStation.
Connection to the AirStation is completed.
When connecting to the AirStation is completed, the application name in the AirStation display will change from gray to black. And the antenna mark ( 
) will also be displayed. If the AirStation application is not displayed in black, refer to Chapter 2 Troubleshooting in the separate Refer- ence Manual.
Immediately after connecting to the AirStation, 2 Mbps or lower baud rate may be dis- played. It should be displayed the normal baud rate as communication starts.
Continue to the Connecting to the Internet.
25
