16
You may also enter the Web-based Conguration Tool without using the software. This
may be necessary to congure the converter without the use of a Windows PC. Use this
method with Linux, Macintosh, other other non-Windows PCs to access the Web-based
Conguration Tool.
Refer to your operating system documentation on how to congure a Static IP address.
The Ethernet Converter has an IP address of 1.1.1.1 by default. You'll need to congure
the computer to be on the same subnet; an IP address of 1.1.1.2 is recommended for the
computer.
With the included network patch cable, connect one of the Ethernet Converter's LAN
ports to an open Ethernet port on a router, switch, or hub on your network. Alternately,
you can plug the Ethernet Converter directly to the conguring computer's Ethernet port.
Once the network cable has been plugged in, plug the Ethernet Convert er's AC Adapter
into an available power outlet. Then attach the power connector to t he back of the
Ethernet Converter. The boot process takes less than a mi nute and is completed when
the power LED glows a solid blue without blinking.
Manual Configuration