22
Initialization
Initializing the Ethernet Converter returns it to default settings. This might be useful
if you cannot access conīƒ€guration settings, have lost the password to the Ethernet
Converter, or desire to return the settings to the default factory settings.
To initialize the device, use a toothpick or straightened-out paperclicp to hold in the
recessed Reset button on the side of the Ethernet Converter until the power LED blinks
red (about 5 seconds). Allow a minute for the initialization to complete. Afterwards, you
will need to re-enter your network's SSID and encryption information to reconnect the
Ethernet Converter to your wireless network.

Reset button