![](/images/new-backgrounds/1118344/11834453x1.webp)
Glossary
10BaseT or 100BaseTX: 802.3 based Eth- ernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps.
802.1x: The standard for wireless LAN authentication used between an AP and a client. 802.1x with EAP will initiate key handling.
Bandwidth: The transmission capacity of a computer or a communication channel, stated in Megabits per second (Mbps).
BSS (Basic Service Set): An 802.11 net- working framework that includes an Access Point.
Bus Mastering: A system in which the spec- ified Input/Output device (e.g. NIC Card) can perform tasks without the intervention of the CPU.
Client: A PC or workstation on a network.
DCE (Data Communications Equipment): Hardware used for communication with a Data Terminal Equipment (DTE) device.
Default Gateway: The IP Address of either the nearest router or server for the LAN.
Default Parameter: Parameter set by the manufacturer.
Destination Address: The address portion of a packet that identifies the intended recipi- ent station.
DHCP (Dynamic Host Configuration Protocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device connected to it, and retrieves the address when the device becomes dormant for a period of time.
27