Step 3: Connecting Wireless Clients
To connect wireless devices to the AirStation, you may either enter the SSID and encryption key manually, or you can use AOSS. For more information on AOSS, see pages 14 and 15.
Consult your wireless clients’ manuals for instructions on configuring them manually. You can get SSID and encryption information from the AirStation’s
initial setup screen, as shown above. By default, the SSID is “macaddress_A” for wireless A channels and “macaddress_G” for wireless G and B channels. By default, encryption is not enabled (“open”).
If you prefer to use encryption and/or a different SSID, you may change these default settings under Basic Settings at the top left of the page.
