Step 1: Connect Your Equipment
1. Make sure that all equipment is powered off, including the AirStation, PCs, and your cable or DSL modem.
2. Connect the Ethernet cable from your cable or DSL modem to the WAN port on your AirStation. The WAN port is the port closest to the power connector. This is the only port that will work for your internet connection.
3. Connect one or more PCs or workstations to any of the four LAN ports on the AirStation with
4. Power on the cable or DSL modem. Give it at least a minute to boot up.
5. Connect the power connector to the power port on the AirStation and to a surge protector or other source of power. Give the AirStation 60 seconds to boot.
