Buffalo Tools GEN154 Stopping The Generator, Maintenance/Care, Recommended Maintenance Schedule

Models: GEN154

1 24
Download 24 pages 56.42 Kb
Page 18
Image 18
STOPPING THE GENERATOR

STOPPING THE GENERATOR

To stop this generator:

1.Turn off all connected electrical devices and then unplug them.

2.Switch the circuit breaker to the “OFF” position.

3.Allow this generator to run for several more minutes with no electrical devices connected to help stabilize the temperature of this generator.

4.Set the engine switch to the “OFF” position.

5.Turn the fuel valve to the “OFF” position.

Allow this generator to cool down before touching areas that become hot during operation.

Allowing gasoline to sit in this generator's fuel tank for extended time without use can increase the difficulty in starting this generator in the future. Never store this generator for extended time with gasoline in the fuel tank.

MAINTENANCE/CARE

Proper routine maintenance of this generator is essential for safe, economical, and trouble-free operation. It will help prolong the life of this generator as well as help reduce air pollution. Perform maintenance checks and procedures according to the schedule in Figure 7.

Never perform maintenance procedures while this generator is running. Allow this generator to cool before commencing any maintenance procedures. Keep heat, sparks and flame away.

Improper maintenance and/or failure to correct any problems prior to operating this generator can cause a malfunction which could cause death or serious injury. Always follow the inspection and maintenance recommendations and schedules in this manual.

Recommended Maintenance Schedule

 

 

Each Use

Every Month or

Every 3 Months or

Every 6 Months or

Every Year or

 

 

 

Each 20 Hrs

Each 50 Hrs

Each 100 Hrs

Each 300 Hrs

Engine Oil

Check Level

X

 

 

 

 

 

Replace

 

X

 

 

 

Air Filter

Check

X

 

 

 

 

 

Clean

 

 

X

 

 

Fuel Filler Cap

Clean

 

 

 

X

 

Spark Plug

Check/Clean

 

 

 

X

 

Fuel Tank

Verify Gas Level

X

 

 

 

 

 

Clean

 

 

 

 

X

Figure 7 - Recommended maintenance schedule

Cleaning the Generator

Always try to use this generator in a cool dry place. If this generator becomes dirty, the exterior can be cleaned with a damp cloth, soft brush, vacuum and/or pressurized air.

Never clean this generator with a bucket of water and/or a hose as water can get inside and cause a short circuit or corrosion.

Never use gasoline to clean parts of this generator.

GEN154 2000 Surge Watts/1500 Running Watts Portable Generator

18

Page 18
Image 18
Buffalo Tools GEN154 Stopping The Generator, Maintenance/Care, Recommended Maintenance Schedule, Cleaning the Generator