Subsequent Use of this Generator

For subsequent uses of this generator after the first use, certain steps still must be completed to prepare it for operation.

IMPORTANT: Be familiar with the procedures described in the previous section titled “Using the Generator for the First Time” of this manual. If not, review this section now.

Step 1 - Verify Oil Level

Even though this generator is equipped with an automatic shutoff to protect it from damage due to low oil, it is important to check the oil level in the engine crankcase before each use to ensure that there is sufficient quantity.

1.Verify that this generator is on a level surface.

2.Unscrew the oil filler/dipstick cap from the engine.

3.With a dry cloth, wipe the oil off of the dipstick that is located on the inside of the cap.

4.Fully insert the dipstick without screwing the filler/dipstick cap and then remove again. There should be oil on the dipstick. If there is no oil on the dipstick, or oil is visible only at the very end of the dipstick, add oil until the engine crankcase is filled. (See “Changing/Adding Oil” in the “Maintenance/Care” section of this manual).

5.Confirm that the oil filler/dipstick cap is properly screwed in place when finished verifying the oil level.

Step 2 - Verify Gas Level

Before starting this generator, verify that there is sufficient gasoline in the fuel tank. The fuel gauge, located on the top of this generator, indicates the gas level currently in the fuel tank. If necessary, add fresh unleaded gasoline with an octane rating of 87 or higher according to “Step 2 - Add Gasoline” of the “Using this Generator for the First Time” section of this manual.

Model GEN154 Fuel Tank Capacity (gals /L)

1.8 / 7

Model GEN154 Fuel Type

Fresh, Unleaded Gasoline Octane Rating 87 or Higher

Gasoline and gasoline fumes are highly flammable and explosive. Handling fuel can result in serious injury or burns.

•Do not fill the fuel tank near a heat, sparks or an open flame. Keep gasoline away from appliance pilot lights, barbecues, electric appliances, power tools, etc.

•Always allow several minutes for the engine to cool before refueling.

•Do not overfill the fuel tank. Always check for fuel spills and immediately wipe them up. Spilled fuel is a fire hazard and causes environmental damage.

IMPORTANT:

•Use only fresh UNLEADED gasoline with an octane rating of 87 or higher.

•Never use old and/or contaminated gasoline.

•Never use a mixture of oil and gasoline.

•Avoid getting dirt and/or water in the fuel tank.

•Never store generator for extended time with gasoline in the fuel tank.

Step 3 - Ground the Generator

Failure to properly ground this generator can result in electrocution.

Ground this generator by tightening the grounding nut against a grounding wire as previously illustrated in Figure 3. A generally acceptable grounding wire is a No. 12 AWG (American Wire Gauge) stranded copper wire. The other end of this grounding wire should be connected to a copper or brass grounding rod that is driven into the earth.

Grounding codes can vary by location. Contact a local electrician for information on grounding regulations for your area.

GEN154 2000 Surge Watts/1500 Running Watts Portable Generator

13

Page 12 Page 14
Page 13
Image 13
Buffalo Tools GEN154 instruction manual Subsequent Use of this Generator, Verify Oil Level
Page 12 Page 14

GEN154 specifications

The Buffalo Tools GEN154 is an innovative and robust electric generator designed to provide reliable power solutions for a variety of applications. This generator is ideal for outdoor activities, emergency backup, and job sites, making it a versatile choice for both home and professional users.

One of the standout features of the GEN154 is its powerful 1500-watt output capability. This makes it suitable for running small appliances, tools, and lighting, ensuring that you have access to electricity wherever you need it. With a maximum output of 1800 watts, it can handle sudden power surges, making it perfect for powering devices that require a little extra energy at startup.

This generator is powered by a reliable four-stroke engine, known for its efficiency and low emissions. The engine is designed for easy starting, boasting an integrated recoil start mechanism that allows for quick power access. Its compact design, combined with a lightweight construction, makes it easy to transport and store, enhancing its usability for those on the go.

The Buffalo Tools GEN154 also features multiple power outlets, including standard AC outlets and a DC outlet, enabling users to connect various devices simultaneously. The built-in circuit breaker provides additional safety, protecting against overloading and ensuring the longevity of both the generator and connected devices.

Another noteworthy characteristic of this generator is its low noise operation. The GEN154 is engineered to produce minimal sound, making it suitable for environments where noise might be a concern, such as camping or tailgating events. This quiet performance does not compromise on power, delivering steady electricity without disruptive noise.

Additionally, the generator has a durable frame, built to withstand rugged conditions. This construction ensures that it can handle the rigors of outdoor use, safeguarding the internal components from damage. The user-friendly control panel is designed with accessibility in mind, allowing for easy operation and monitoring of power output.

In summary, the Buffalo Tools GEN154 is a reliable and powerful generator, equipped with essential features such as a strong engine, multiple outlets, low noise operation, and a durable build. Whether for recreational use, emergencies, or job sites, it offers a solid solution for anyone in need of portable power.
Top Page Image Contents