PREPARING THE GENERATOR FOR USE
Using this Generator for the First-Time
STOP!
The following section describes the required steps for preparing this generator for the first use. Failure to correctly perform these steps can damage this generator and/or shorten its life. If still unsure about how to perform any of these steps after reading this section, call
If this generator is being used for the first time, the following few steps are required to prepare it for operation:
Step 1 - Add Oil
This generator requires engine oil to function. Engine oil is a major factor affecting engine performance and service life. When new from the package, this generator contains no oil in the engine crankcase. The correct quantity of oil is equal to the oil capacity of the engine crankcase and is 20.0 fluid oz (0.60 L) for this Model GEN3250 Portable Generator. Add the correct quantity of oil before operating this generator for the first time. When replenishing oil for subsequent use of this generator, always determine that this generator
has the correct quantity of oil.
Model GEN3250 Oil Capacity (fluid oz./L) | 20.0 / 0.6 |
Model GEN3250 Oil Type Recommended |
To add oil:
1.Confirm that this generator is on a level surface.
2.Open the Oil Access Panel as illustrated in Figure 1.
3.Using a funnel, add high detergent motor oil to fill the engine crankcase to the correct quantity as stated above.
4.Replace the oil filler/dipstick cap and close the oil access panel.
Figure 1 | Figure 2 - Adding Oil |
GEN3250 3250 Surge Watts/2500 Running Watts Portable Generator | 10 |
