People with pacemakers or other electronic devices should consult with a physician before operating this product. Interruption or failure of the pacemaker could occur when electrical equipment is operated within close proximity of electrical devices.

Wash hands after handling the power cord. Touching the power cord could expose you to lead, which is known in the State of California to cause cancer, birth defects and other reproductive harm.

All work areas should be clean and well lit. Accidents are likely to occur in poorly lit, cluttered areas.

Keep children, and other distractions at a distance while operating the parts washer.

Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to pull the plug from the outlet. Keep the cord away from materials and surfaces that could damage cords. The risk of electric shock increases when the power cord is damaged.

Always use the appropriate extension cord, making sure it is rated for use with parts washer. Always be sure the extension cords are in good condition, free of cuts or nicks in the insulation. If using the power tool in an outside area with an extension cord, make sure the cord is rated for outdoor use.

Do not make contact with a grounded surface while using this parts washer. Contact with surfaces like pipes, radiators or major appliances increases your risk of electric shock.

Use common sense while operating this parts washer.

Do not use this tool if you are:

Feeling tired or are under the influence of alcohol or drugs.

Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.

Overreaching or have improper footing. Handling the tool in this way could cause serious injury.

When using this parts washer, always:

Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.

Check to be sure all adjusting keys or wrenches have been removed before starting the power tool.

Check that the power switch is in the “OFF” position before plugging the unit into an electrical outlet.

Follow these steps to maintain safe working conditions and good working condition of power tools. Improper care can result in electric shock or serious injury.

Secure and support the work piece using clamps. Do not use your hands to hold the piece in place. Use the correct tool for the job. Using the correct tool is safer and faster.

Make sure the power switch is in good working order. If the power switch no longer turns the tool “ON” or “OFF”, discontinue use, and have the tool replaced or repaired.

Remove the power cord from the power source before storage, changing accessories, or moving. Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.

Keep tools clean, and cutting tools sharp. Maintaining tools with proper care will increase the life of the power tool, and reduce the risk of injury.

Check to be sure all moving parts are free from binding and are properly aligned.

Use only accessories that are recommended by the manufacturer for your tool model.

Safety glasses and ear protection must be worn during operation.

PWASH20 20 Gallon Parts Washer Assembly & Operating Instructions

5

Page 5
Image 5
Buffalo Tools PWASH20 operating instructions

PWASH20 specifications

The Buffalo Tools PWASH20 is a powerful and versatile pressure washer designed to tackle a wide range of cleaning tasks around the home and outdoors. With a robust 2000 PSI output, this electric pressure washer delivers impressive cleaning power, making it an ideal choice for homeowners and DIY enthusiasts alike. Its efficient design promotes ease of use and exceptional performance, ensuring that cleaning chores are completed quickly and effectively.

One of the key features of the Buffalo Tools PWASH20 is its 1.76 GPM flow rate, which allows for a thorough wash on various surfaces without wasting water. The pressure washer is equipped with an electric motor that eliminates the need for gas, providing a quieter and more environmentally friendly alternative to gas-powered models. This also means lower maintenance costs, as there are no oil changes or fuel requirements.

The PWASH20 comes with several quick-connect nozzles, allowing users to easily choose the right spray pattern for different cleaning tasks. The included nozzles provide options for low-pressure fan spray, high-pressure rinse, and everything in between, ensuring flexibility for a variety of surfaces, including patios, decks, vehicles, driveways, and more. This adaptability makes it suitable for both tough grime removal and gentler applications.

Another significant characteristic of the Buffalo Tools PWASH20 is its lightweight and portable design. Weighing in at just under 50 pounds, this pressure washer is easy to move around the yard or loading into a vehicle for transportation. Its compact dimension aids in storage, allowing it to fit neatly in a garage or shed when not in use.

Additionally, the PWASH20 features a durable construction with a sturdy frame that can withstand the rigors of outdoor cleaning tasks. The high-quality hose is designed to resist kinks and abrasions, further enhancing the longevity of the product. The inclusion of onboard detergent tanks provides convenience when applying soap, making it simpler to tackle medium to heavy-duty cleaning jobs.

In conclusion, the Buffalo Tools PWASH20 combines both power and convenience, making it an essential tool for homeowners seeking an effective and efficient pressure washer. Whether removing stubborn dirt from a garage floor or cleaning the exterior of a home, this model stands out for its practical features, user-friendly design, and overall performance.