MAINTENANCE

Disconnect the power supply before cleaning. Wear safety eyewear before cleaning.

A qualified repair technician must perform any tool service or repair. Service or maintenance performed by unqualified personnel could result in injury. Use only identical replacement parts. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

Do not make contact with a grounded surface while using this power tool. Contact with surfaces like pipes, radiators or major appliances increase your risk of electric shock.

Warning: Always unplug the Power Cord from the electrical outlet before performing any maintenance.

Replacing Cleaning Solution

1.Replace the cleaning solution when it becomes dirty.

2.Place an empty container on the lower Shelf that is large enough to hold all of the liquid which is in the Body.

3.Remove the Plug from the bottom of the Body. The fluid should drain into the empty container on the Shelf below.

4.Dispose of the used cleaning solution properly. Do not drain the cleaning solution into the street drains, house drains, or into the earth. Contact your local waste management officials for proper disposal methods.

5.Replace the Plug then refill the Body with new cleaning solution.

When the cleaning solution flow is reduced or stopped, it may be necessary to clean the Flexible Pipe (24).

Cleaning the Flexible Pipe and Impeller

1.Make certain that the indicator light on the Switch Box is on.

2.Turn the Switch to the OFF position.

3.Unplug the Power Cord from the electrical outlet.

4.Remove the Flexible Pipe from the Elbow. Drain the pipe, inspect its interior for debris. Use compressed air to blow clean.

5.Remove the Pump Housing Cover by removing the Screws, then clear and remove any foreign matter

from the impeller.

6. Reattach the Flexible Pipe to the Elbow, and replace the Pump Housing Cover.

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Always attach grounded (3-prong) extension cords to grounded (3-prong) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool. If not, your tool may experience a loss of power, excessive voltage drop or overheating. For example, the smaller the gauge number, the heavier the cord.

PWASH20 20 Gallon Parts Washer Assembly & Operating Instructions

9

Page 8 Page 10
Page 9
Image 9
Buffalo Tools PWASH20 operating instructions Maintenance, Accessories
Page 8 Page 10

PWASH20 specifications

The Buffalo Tools PWASH20 is a powerful and versatile pressure washer designed to tackle a wide range of cleaning tasks around the home and outdoors. With a robust 2000 PSI output, this electric pressure washer delivers impressive cleaning power, making it an ideal choice for homeowners and DIY enthusiasts alike. Its efficient design promotes ease of use and exceptional performance, ensuring that cleaning chores are completed quickly and effectively.

One of the key features of the Buffalo Tools PWASH20 is its 1.76 GPM flow rate, which allows for a thorough wash on various surfaces without wasting water. The pressure washer is equipped with an electric motor that eliminates the need for gas, providing a quieter and more environmentally friendly alternative to gas-powered models. This also means lower maintenance costs, as there are no oil changes or fuel requirements.

The PWASH20 comes with several quick-connect nozzles, allowing users to easily choose the right spray pattern for different cleaning tasks. The included nozzles provide options for low-pressure fan spray, high-pressure rinse, and everything in between, ensuring flexibility for a variety of surfaces, including patios, decks, vehicles, driveways, and more. This adaptability makes it suitable for both tough grime removal and gentler applications.

Another significant characteristic of the Buffalo Tools PWASH20 is its lightweight and portable design. Weighing in at just under 50 pounds, this pressure washer is easy to move around the yard or loading into a vehicle for transportation. Its compact dimension aids in storage, allowing it to fit neatly in a garage or shed when not in use.

Additionally, the PWASH20 features a durable construction with a sturdy frame that can withstand the rigors of outdoor cleaning tasks. The high-quality hose is designed to resist kinks and abrasions, further enhancing the longevity of the product. The inclusion of onboard detergent tanks provides convenience when applying soap, making it simpler to tackle medium to heavy-duty cleaning jobs.

In conclusion, the Buffalo Tools PWASH20 combines both power and convenience, making it an essential tool for homeowners seeking an effective and efficient pressure washer. Whether removing stubborn dirt from a garage floor or cleaning the exterior of a home, this model stands out for its practical features, user-friendly design, and overall performance.
Top Page Image Contents