16104 Backsaver Auger Specifications
specifications
Tubing
Y16104
Tubes #1 and #2: 10 gauge
Tubes #3, #4, #5: 11 gauge
Flighting | ¼" on swing and main auger |
Flighting shaft | 3" diameter, ³⁄16" wall |
Undercarriage | 5" x 5" x ¼" square tube |
Lift arms | ¼" formed tubing |
Bridging | Upper bridging (cable) ¾" |
| Side bridging (cable) ½" |
Wheel and hubs | 8 bolt hubs, 16.5 L x 16.1 x 10 ply |
Hopper dimensions | 48" x 60" x 13 ½" tall |
Clearance in down position | 14' 10" |
Below spout to ground @ maximum lift | 77' 4" |
Below spout to ground in down position | 12' 5" |
Reach - edge of wheels to center of spout down position | 57' 8" |
Reach - edge of wheels to center of spout ½ up position (44' 3" | 52' |
Reach - edge of wheels to center of spout up position | 36' 1" |
Tube angle, up position | 44° |
Tube angle, down position | 5° |
Wheel track center to center | 13' ½" |
Wheel track outside of wheels | 14' 5 ½" |
Hitch weight in down position | 2,700 lbs |
Overall weight | 13,000 lbs |
Tractor requirements |
|
Minimum PTO horsepower (w/1000 RPM PTO) | 175 HP |
Approximate hydraulic requirements for lift | 1500 PSI |
