Parking on Hills

CAUTION:

You really should not park your vehicle, with a trailer attached, on a hill. If something goes wrong, your rig could start to move. People can be injured, and both your vehicle and the trailer can be damaged.

But if you ever have to park your rig on a hill, here's how to do it:

1.Apply your regular brakes, but don't shift into PARK (P) yet.

2.Have someone place chocks under the trailer wheels.

3.When the wheel chocks are in place, release the regular brakes until the chocks absorb the load.

4.Reapply the regular brakes. Then apply your parking brake, and then shift to PARK (P).

5.Release the regular brakes.

yellow blue

When You Are Ready to Leave After Parking on a Hill

1.Apply your regular brakes and hold the pedal down while you:

D Start your engine; D Shift into a gear; and

D Release the parking brake.

2.Let up on the brake pedal.

3.Drive slowly until the trailer is clear of the chocks.

4.Stop and have someone pick up and store the chocks.

Maintenance When Trailer Towing

Your vehicle will need service more often when you're pulling a trailer. See the Maintenance Schedule for more on this. Things that are especially important in trailer operation are automatic transaxle fluid (don't overfill), engine oil, drive belt, cooling system and brake system. Each of these is covered in this manual, and the Index will help you find them quickly. If you're trailering, it's a good idea to review this information before you start your trip.

Check periodically to see that all hitch nuts and bolts are tight.

Engine Cooling When Trailer Towing

Your cooling system may temporarily overheat during severe operating conditions. See ªEngine Overheatingº in the Index.

4-39

Page 226
Image 226
Buick 2000 manual Parking on Hills, When You Are Ready to Leave After Parking on a Hill, Maintenance When Trailer Towing