Bunn 10690 service manual Introduction, Explanation of codes

INTRODUCTION

This equipment will brew one or two half-gallon batches of coffee simultaneously into awaiting dispensers (with just the press of a button). One side may include a hot water faucet for allied beverage use. It is only for indoor use on a sturdy counter.

USER NOTICES	4
ELECTRICAL REQUIREMENTS	5
PLUMBING REQUIREMENTS (CURRENT SINGLES)	6
PLUMBING REQUIREMENTS (CURRENT TWINS)	7
PLUMBING REQUIREMENTS (EARLY SINGLES)	8
PLUMBING REQUIREMENTS (EARLY TWINS)	9
INITIAL SET-UP	10
ADJUSTING BREW VOLUMES	11
OPERATING CONTROLS	12
BREWING	14
CLEANING	15
TROUBLESHOOTING	12

Explanation of codes:

15 - All components in machine are rated for 120 Volts ac, (15 Amps)

20 - All components in machine are rated for 120 Volts ac, (20 Amps)

35 (120/240V) - Tank heater rated for 240 volts ac, all other components rated for 120 volts ac (20 Amps) DV - Dual Voltage. 2 tank heaters with toggle switch

MV - Multi Voltage. 2 tank heaters with terminal block. (Replaced by DV) A - All components in machine are rated for 240 volts ac.

B - All components are rated for either 100 volts ac, or 200 volts ac. C - Canadian models only

CE - European models only. TWIN - 2 brewers in 1 chassis. APS - Airpot Server (No warmers) TC - Thermal Carafe (No warmers) TS - Thermal Server (No warmers)

Page 3 41721 111308