Using The Server, Cleaning

USING THE SERVER

1.Lock the cover in place on the server by turning it clockwise as far as it will go.

2.Locate the center of the server cover directly under the funnel dripout of a Bunn® coffee brewer when brew- ing directly into the server.

3.The hot beverage is available at the faucet. The sight gage displays the remaining beverage in the server.

4.As the server is emptied, more may be added.

NOTE – Be careful not to overfill the server.

1.Turn the lid assembly counterclockwise as far as it will go to remove it for daily

dishwasher cleaning.

NOTE – Bunn-O-Matic recommends CASCADE® dishwashing detergent for thorough cleaning. DO NOT use bleach.

CASCADE® is a registered trademark of Procter & Gamble Co., Cincinnati, Ohio.

2. Remove the cap from the lid assembly by unscrewing in a counterclockwise direc- tion. Remove the gasket from the bottom side of the lid assembly.

3. After thoroughly cleaning all parts, reassemble the lid assembly.

4.Clean all other surfaces with a damp cloth rinsed in any mild, non-abrasive, liquid detergent.

5.Clean the sight gage with a brush.

6. Thoroughly rinse the entire server after cleaning.

P2495

10241.1 050712