JVC toledo Cleaning Your Cooker, Single Ring Burners, Wok Burner, Wok Cradle

5. Cleaning Your Cooker

Isolate the electricity supply before carrying out any thorough cleaning. Allow the cooker to cool.

NEVER use paint solvents, washing soda, caustic

nn

cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt.

DO NOT mix di￿erent cleaning products – they may

nn

react together with hazardous results.

All parts of the cooker can be cleaned with hot soapy water

–but take care that no surplus water seeps into the appliance.

Remember to switch on the electricity supply and reset the clock before re-using the cooker.

Hotplate Burners

The burner heads and caps can be removed for cleaning. Make sure they are absolutely dry before replacing them.

The Single Ring Burners

When re￿tting the burner head, make sure that the notch lines up with the electrode or hole in the base. Check that the burner head is level and that the cap is ￿tted centrally on the burner head (Fig.5-1).

The Wok Burner

When reassembling the wok burner (Fig.5-2), turn over the large base ring and ￿nd the ‘D’ shaped area (Fig.5-3). Turn the head until the ‘D’ matches the one on the burner base. Flip the burner over once again and place it on the burner base.

To ￿t the small inner burner, ￿nd the larger electrode notch in the burner rim. Line this up with the white ignition electrode and place the inner burner on the large base ring (Fig.5-4).

Now ￿t the two burner caps, making sure that they are seated properly.

Check the burner ports are not blocked. If a blockage occurs, remove stubborn particles using a piece of fuse wire.

The Wok Cradle

Recommended cleaning materials are hot soapy water, a moistened soap pad, cream cleaner or a nylon scourer.

The Griddle

Always clean the griddle after use. Allow it to cool completely before removing. Immerse the griddle plate in hot soapy water. Use a soft cloth or, for stubborn stains, a nylon washing up brush.

Note: If the griddle is washed in a dishwasher then some dishwasher residue may appear on the back. This is normal and will not a￿ect the performance of your griddle.

A	Fig.5-1
	C
B
D	E

A – Cap, B – Head, C – Notch, D – Base , E – Electrode

A Fig.5-2

B

C

D

ArtNo.311-0033 Wok burner details FSD

E

A – Inner burner cap, B – Outer burner head, C – Inner burner head,

D – Outer burner head, E – Wok burner base

Fig.5-3

B Fig.5-4

A

ArtNo.311-0016 Fitting the burner inner head

A – Electrode notch, B – Ignition electrode

13