JVC toledo B C D, Setting the Time of Day, Minute Minder, To Stop the Ovens Automatically

Fig.2-21

ArtNo.302-0002 - 6BC annotated

	A	B C D		E F
A – Minute minder,		B – ‘Cook’ time,	C – ‘Stop’ time, D – Manual,
		E & F – Time setting buttons
Fig.2-22

Fig.2-23 Fig.2-24

ArtNo.302-0003 - 6BC

minute minder setting 1 ArtNo.302-0004 - Minute minder setting 2

The Clock

You can use the timer (Fig.2-21)to turn the ovens on and o￿. The clock must be set to the time of day before the ovens will work.

Setting the Time of Day

When the clock is ￿rst connected the display ￿ashes ( 0.00 ) and () alternately.

Press and hold both the [] and [] buttons down (Fig.2-22). Now press the [+] button (or the [–] button) until the correct time shows.

Do not forget that it is a 24-hour clock.

If you need to reset the cooker, turn o￿ the power supply and wait for a couple of minutes and start again.

Minute Minder

Press and hold the [] button (Fig.2-23), and then press the

[+]button until the length of time you want to cook for is shown (Fig.2-24).

You can check the time remaining by pressing []. When the beeper sounds cancel it by pressing [].

•The ‘cook period’, which is the length of time you want the oven to cook for.

•The ‘stop time’, which is the time of day you want the oven to stop cooking.

Fig.2-25		Fig.2-26
ArtNo.302-0005 -	ArtNo.302-0005a -
6BC Stopping the oven 1	6BC Stopping the oven 1a

Fig.2-27		Fig.2-28
ArtNo.302-0006 - 6BC	ArtNo.302-0006 - 6BC
setting the cook time	setting the cook time

Fig.2-29		Fig.2-30
ArtNo.302-0005 -	ArtNo.302-0005a -
6BC Stopping the oven 1	6BC Stopping the oven 1a

To Stop the Ovens Automatically

Press and hold the ‘stop time’ [] button (Fig.2-25)and then press the [+] button (or [–] button) until the required ‘stop time’ shows (Fig.2-26). AUTO will show in the display.

Once the ‘stop time’ is reached, the beeper sounds. To stop the beep turn the oven control knob to 0 ￿rst and then press [] once; press [] again to return to manual cooking.

To Start and Stop the Ovens Automatically

Before you set the clock you must have two numbers clearly in mind – the ‘cook period’ and the ‘stop time’.

Note: You cannot set a start time directly – this is set automatically by setting the ‘cook period’ and the ‘stop time’.

Press and hold the [] button (Fig.2-27)and then press the

[+]button (or [–] button) until the required ‘cook period’ shows (Fig.2-28).

Now press and hold the [] button (Fig.2-29)and then press the [+] button (or [–] button) until the required ‘stop time’ shows (Fig.2-30). Release the buttons.

AUTO will now show in the display.

Set the oven(s) to the required temperature. When cooking is ￿nished the beeper will sound. Turn the oven knob(s) to the OFF position ￿rst, and then press the [] button once to stop the beep; press it again to return to manual cooking.

If you are out, do not worry about the beeper going o￿, it stops after a while. When you return, turn the oven knob(s) to 0 ￿rst, and then press [] twice to return to manual cooking.

8